Monitor Audio
As an expert in the audio industry, Monitor Audio presents the Gold C250 6G centre speaker for home cinema enthusiasts. Its compact three-way design, twin 6-inch bass drivers, HDT technology, MPD III high-frequency transducer, and 3-inch mid-driver promise an immersive experience with lifelike vocals and powerful dynamics. Perfect for building a high-impact home cinema system.
New HDT, C-CAM Cone
Taking a cue from the honeycomb structure of the RDT III cone technology from Hyphn/ Platinum Series, the new HDT cone uses a hexagonal pattern to disrupt symmetries in the cone breakup to shift its frequency up by 10% compared to RST II.
New Aluminum mid-pod
The Gold Series 6G transducer and middriver sits within a dedicated, and carefully designed steel encased ‘mid-pod’. This enclosure ensures optimum acoustic performance without compromising the cabinet volume required for the bass drivers.
New 3-inch mid-frequency driver
Utilising a high-strength motor unit with a neodymium bucking magnet, a regressive spider design, and increased voice coil venting, the new Gold Series 6G’s 3-inch mid-frequency driver exhibits lower distortion and improved sensitivity, frequency response, and directivity.
New MPD III high frequency transducer
Based on the MPD III from Hyphn/Platinum Series, the Gold Series 6G’s MPD III has been carefully optimised to work in harmony with the driver system. Freedom from physical constraints as seen in the Hyphn’s M-Array has allowed for further optimisation for use in two-way systems.
New crossover design
Delivering on Monitor Audio’s Transparent Design Philosophy, the Gold Series 6G’s crossovers have been optimised for in-room performance; this is particularly important for the new On-Wall product, where typical usage is closer to Custom Install than traditional HiFi.
| System Format | 3-Way |
| Sensitivity (2.83v @ 1m, Free-Field) | 87.5dB |
| Sensitivity (2.83v @ 1m, Installed) | NA |
| Recommended Amplifier Power (RMS into 4 Ohms, Music Signal) | 130-500W |
| Continuous Power Handling | 250W |
| Nominal Impedance | 4 Ohms |
| Minimum Impedance (20Hz to 20kHz) | 3.9 Ohms @ 165Hz |
| Drive Unit Complement |
|
| Frequency Response Free-Field (-6dB) | 64Hz - 60kHz |
| Frequency Response In-Room (-6dB) | 54Hz - 60kHz |
| Maximum Peak SPL | 121dB |
| Bass Alignment | Sealed |
| Port Tuning Frequency | NA |
| Crossover Frequency |
|
| External Dimensions with all accessories fitted | 8 1/6" (205mm) x 21 1/8" (537mm) x 13 3/16" (335mm) |
| Weight (Each) | 33lb 12oz (15.3kg) |