Monitor Audio Gold C250 6G Center Speaker (Single)
Monitor AudioAs an expert in the audio industry, Monitor Audio presents the Gold C250 6G centre speaker for home cinema enthusiasts. Its compact three-way design, twin 6-inch bass drivers, HDT technology, MPD III high-frequency transducer, and 3-inch mid-driver promise an immersive experience with lifelike vocals and powerful dynamics. Perfect for building a high-impact home cinema system.
New HDT, C-CAM Cone
Taking a cue from the honeycomb structure of the RDT III cone technology from Hyphn/ Platinum Series, the new HDT cone uses a hexagonal pattern to disrupt symmetries in the cone breakup to shift its frequency up by 10% compared to RST II.
New Aluminum mid-pod
The Gold Series 6G transducer and middriver sits within a dedicated, and carefully designed steel encased ‘mid-pod’. This enclosure ensures optimum acoustic performance without compromising the cabinet volume required for the bass drivers.
New 3-inch mid-frequency driver
Utilising a high-strength motor unit with a neodymium bucking magnet, a regressive spider design, and increased voice coil venting, the new Gold Series 6G’s 3-inch mid-frequency driver exhibits lower distortion and improved sensitivity, frequency response, and directivity.
New MPD III high frequency transducer
Based on the MPD III from Hyphn/Platinum Series, the Gold Series 6G’s MPD III has been carefully optimised to work in harmony with the driver system. Freedom from physical constraints as seen in the Hyphn’s M-Array has allowed for further optimisation for use in two-way systems.
New crossover design
Delivering on Monitor Audio’s Transparent Design Philosophy, the Gold Series 6G’s crossovers have been optimised for in-room performance; this is particularly important for the new On-Wall product, where typical usage is closer to Custom Install than traditional HiFi.
System Format | 3-Way |
Sensitivity (2.83v @ 1m, Free-Field) | 87.5dB |
Sensitivity (2.83v @ 1m, Installed) | NA |
Recommended Amplifier Power (RMS into 4 Ohms, Music Signal) | 130-500W |
Continuous Power Handling | 250W |
Nominal Impedance | 4 Ohms |
Minimum Impedance (20Hz to 20kHz) | 3.9 Ohms @ 165Hz |
Drive Unit Complement |
|
Frequency Response Free-Field (-6dB) | 64Hz - 60kHz |
Frequency Response In-Room (-6dB) | 54Hz - 60kHz |
Maximum Peak SPL | 121dB |
Bass Alignment | Sealed |
Port Tuning Frequency | NA |
Crossover Frequency |
|
External Dimensions with all accessories fitted | 8 1/6" (205mm) x 21 1/8" (537mm) x 13 3/16" (335mm) |
Weight (Each) | 33lb 12oz (15.3kg) |