Monitor Audio Gold 300 6G Floorstanding Speakers
Monitor AudioExperience pure, detailed high-fidelity sound with Monitor Audio Gold 300 6G floorstanding speakers. Designed with the latest MPD III high-frequency transducer and HDT, C-CAM cone technology, these speakers offer outstanding performance at an affordable price. With twin 6-inch bass drivers, enjoy powerful and precise sound for your music and movie scores.
New HDT, C-CAM Cone
Taking a cue from the honeycomb structure of the RDT III cone technology from Hyphn/ Platinum Series, the new HDT cone uses a hexagonal pattern to disrupt symmetries in the cone breakup to shift its frequency up by 10% compared to RST II.
New Aluminum mid-pod
The Gold Series 6G transducer and middriver sits within a dedicated, and carefully designed steel encased ‘mid-pod’. This enclosure ensures optimum acoustic performance without compromising the cabinet volume required for the bass drivers.
New 6 and 8 inch Bass Drivers
With the new HDT, C-CAM cone, FEAoptimised surround and spider designs, plus increased voice coil length, the new Gold Series 6G’s 6- and 8-inch bass drivers exhibit greater linearity, reducing distortion in the bass for cleaner and punchier low end.
New 3-inch mid-frequency driver
Utilising a high-strength motor unit with a neodymium bucking magnet, a regressive spider design, and increased voice coil venting, the new Gold Series 6G’s 3-inch mid-frequency driver exhibits lower distortion and improved sensitivity, frequency response, and directivity.
New MPD III high frequency transducer
Based on the MPD III from Hyphn/Platinum Series, the Gold Series 6G’s MPD III has been carefully optimised to work in harmony with the driver system. Freedom from physical constraints as seen in the Hyphn’s M-Array has allowed for further optimisation for use in two-way systems.
New crossover design
Delivering on Monitor Audio’s Transparent Design Philosophy, the Gold Series 6G’s crossovers have been optimised for in-room performance; this is particularly important for the new On-Wall product, where typical usage is closer to Custom Install than traditional HiFi.
System Format | 3-Way |
Sensitivity (2.83v @ 1m, Free-Field) | 87dB |
Sensitivity (2.83v @ 1m, Installed) | NA |
Recommended Amplifier Power (RMS into 4 Ohms, Music Signal) | 130-500W |
Continuous Power Handling | 250W |
Nominal Impedance | 4 Ohms |
Minimum Impedance (20Hz to 20kHz) | 3.9 Ohms @ 165Hz |
Drive Unit Complement |
|
Frequency Response Free-Field (-6dB) | 45Hz - 60kHz |
Frequency Response In-Room (-6dB) | 28Hz - 60kHz |
Maximum Peak SPL | 117dB |
Bass Alignment | HiVe II Ported |
Port Tuning Frequency | 35Hz |
Crossover Frequency |
|
External Dimensions with all accessories fitted | 43 1/4" (1098mm) x 13 3/8" (339mm) x 18 1/4" (463mm) |
Weight (Each) | 46lb 12oz (21.2kg) |