Bowers & Wilkins CWM7.3 S2 In-Wall Speaker (Each)
Bowers & Wilkins Custom
CWM7.3 S2 In Wall Speaker (Each)
In-Wall system with 703 S2 Performance Levels!
The CWM7.3 S2 features an integrated backbox that optimises its performance, cuts down on sound transference through walls and also makes it easy to retrofit. Its design incorporates twin 6" Aerofoil profile bass drivers, a 4" Continuum cone FSTTM mid-range driver and a Carbon Dome 1" tweeter, all proven technologies shared with the acclaimed 700 Series range of loudspeakers. These outstanding tranducers, when combined with high-quality, optimised, components on the crossover and a critically formed baffle constructed from glass reinforced ABS, produce a truly remarkable in-wall speaker.
| Technical features |
|
| Description | 3-way in-wall system |
| Drive units |
|
| Frequency range (-6dB | -6dB at 43Hz and 33kHz |
| Frequency Response -3dB | 45Hz - 28kHz ±3dB |
| Sensitivity | 90dB spl (2.83Vrms, 1m) |
| Harmonic distortion |
|
| Nominal impedance | 8Ω (minimum 3.1Ω) |
| Recommended amplifier power | 25W - 200W into 8Ω on unclipped programme |
| Frame height | 736mm (29in) |
| Frame width | 276mm (11in) |
| Depth (behind surface) | 102mm (4.02in) |
| Cut-out height | 711mm (28in) |
| Cut-out width | 251mm (9.9in |
| Cut-out height w/PMK | 715mm (28.1in) |
| Cut-out width w/PMK | 256mm (10.1in) |
| Reservoir box height | 460mm (18.1in |
| Reservoir box width | 220mm (8.7in) |
| Protrusion | 7mm (0.28in) |
| PMK | 7.3W |
| Net weight | 12.4kg (27.32lb) |
| Finishes |
|
Backbox - Integrated
Pre-Mount Kit
- Identifies the position of the speaker during construction.
- Provides a guide for cutting plasterboard.